DELL Inspiron 1320 1320n Battery Replace Ways

    Laptop battery compartment from the two with the "+" contact spring connected to an arbitrary choice of the film, with the wire to the positive terminal of the battery connected to it; also choose one with "-" connected to the contacts and battery springs connected to the negative. Finally, we need DELL Inspiron 1320 Battery connected to the original two labeled "T" word on the interface of a metal electronic components (see Figure 3, the part inside the circle, this component is estimated that a laptop as part of the battery identification circuit, with the detection of the battery is connected to the laptop computer) removed, solder in the notebook compartment corresponding contact pad on the spring (if not the device, battery power to the notebook computer, the POST will appear after a period of time the machine automatically off phenomenon). Of course, these operations should be carried out in the off state.

    On the phone longer, then maybe the machine will enter the sleep state,
Naturally even less power consumption. Therefore, the actual use of time than the full load (nearly constant current) situation longer. Or above the A / B 2 cells, the actual use of time comparison table below, for reference:

   using DELL Inspiron 1320n Battery. Since 2040 the pressure limit, Vsb voltage requires a voltage lower than Vcc, the circuit structure, in order to ensure the accuracy voltage detection, need to use two high-precision 1% resistors to partial pressure,